background image

 

Water resistance

 

IPX7

 

NOTICE

 

Do not submerge or pressure wash the 
components.

 

Radio frequency/ 
protocol

2.4 GHz ANT+ wireless communications protocol

 

Bluetooth® Smart wireless technology

 

 

Battery Information

 

Vector 3 monitors the battery level of both pedal pods and sends 

status information to your Edge device. When you receive a low 

battery warning, you have approximately 10–20 hours of 

operation time remaining.

 

 

 

 

Do not use a sharp object to remove user-replaceable batteries.

 

 

 

Contact your local waste disposal department to properly 

recycle the batteries. Perchlorate Material – special handling

 

may apply. Go to 

www.dtsc.ca.gov/hazardouswaste/perchlorate

.

 

 

 

NOTE: 

Always replace all batteries at the same time.

 

1

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 
 
 
 
 
 
 
 
 

 

Vector 3 Storage

 

If you are transporting your bicycle or not using Vector 3 for 

an extended period of time, Garmin recommends removing 

Vector 3 and storing it in the product box.

 

 

Vector 3 Specifications

 

 

Battery type

 

User-replaceable LR44, 1.5 volts, 2 per pedal

 

Note: SR44 batteries are compatible replacements.

Battery life

 

Estimated 120 hours of riding time

 

Operating 
temperature range

 

From 14° to 122°F (from -10° to 50°C)

 

 
 
 
 

 

 

Device Information 

5

 

WARNING

 

Summary of Contents for VECTOR 3 A03220













Reviews: