2
E
N
Introduction
WARNING
Read all instructions carefully before
installing and using the Vector™ system.
Improper use could result in serious
injury.
See the
Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
NOTICE
Go to www.garmin.com/vectorowner
for the latest information including bike
compatibility, software updates, and video
tutorials.
Tools Needed
• 15 mm pedal wrench
• Bike grease
• 3 mm hex key
• 4 mm hex key
Installing Vector Components
Preparing for the Installation
1
Confirm the compatibility of your bike
at www.garmin.com/vectorowner.
2
Find the sensor ID that is engraved
on the spindle, and write it down.
3
Remove the existing pedals.
4
Clean the threads, and remove old
grease.
