3 Unlock both sides of the trainer.
4 Fold up both sides until they click into place.
Troubleshooting
Updating the Trainer Software
Before you can update the trainer software, you must pair your trainer with the latest version of the Tacx
Training app (
Pairing the Trainer with the Tacx Training App, page 11
).
1 Connect the power cable to a wall outlet (
Connecting the Power Cable, page 9
).
2 Open the Tacx Training app on your phone or tablet.
TIP: You should check the battery level of your phone or tablet.
3 Select Settings > Device Manager.
4 Select your trainer.
5 Select Firmware Update > Update.
The trainer LED flashes cyan while the software is updating.
6 Wait while the software update finishes.
TIP: Do not unplug the trainer or switch between apps while the software is updating.
This might take a couple of minutes.
16
Troubleshooting
