StreetPilot 7200/7500 Owner’s Manual
5
c
UstoMizinG
y
oUr
s
treet
P
iLot
Turning Safe Mode Off and On
From the Menu page, touch
Settings
>
general
>
Safe
mode
. Turn on or off the safe mode, which disables all
unit functions that require significant operator attention
and could become a distraction while driving.
Changing the Coordinates Settings
From the Menu page, touch
Settings
>
general
>
coordinates
.
Position Format
—change the appearance of
coordinates.Your current position is viewed on the GPS
in the form of coordinates. Because different maps and
charts use different position formats, the StreetPilot
allows you to choose the correct coordinate system for
the type of map you are using.
map Datum
—select the map datum to be used by your
StreetPilot. If you are navigating and comparing the GPS
coordinates to a map, chart, or other reference, set the
map datum in your StreetPilot to the same datum as the
map to ensure the most accurate navigation.
Changing the Map Settings
From the Menu page, touch
Settings
>
map
.
map Detail
—adjust the amount of detail shown on the
map. Displaying more detail causes the map to redraw
slowly.
