StreetPilot 7200/7500 Owner’s Manual
c
UstoMizinG
y
oUr
s
treet
P
iLot
guidance—
turn on the vocal guidance prompts. Select
Speak Key only
to hear the voice prompts only when
you press the
SPeaK
key on the remote control.
attention tone—
turn on or off the attention tone
sounded before voice prompts.
touch Screen tone
—turn on or off the tone sounded
each time you touch the screen.
Keypress
tone
—turn on or off the tone sounded each
time you press a button on the remote.
Speed adjusted Volume
—select how much the volume
increases as your speed increases:
low
,
medium
, or
high
. To manually control the volume, select
off
.
audio Jack
—select
headphones
when using
headphones. Select
line out
if you are connecting to
the audio input of another device (like a car stereo), and
excessive audio noise is heard.
Configuring
Video Input
The StreetPilot supports NTSC (North America) and
PAL (Australia) composite video input. From the Menu
page, touch
Settings
>
general
>
Video input
.
input type
—select the video input type:
DVD/video
or
backup camera
. For more information about setting up
the backup camera, see
Detection response
—select how the StreetPilot
switches to the video. This setting changes to
reverse
response
when
backup camera
is selected.
Volume
—opens the Adjust Volume Level page. See
View Source
—displays the video source.
note:
When you switch from the video input
to the navigation screens, the screen momentarily
turns black and then the navigation screens
appear. This is normal.