Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-02 Rev. A
53
hazard Avoidance
Flight
Instruments
EAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
sector scan
1)
While in the Horizontal Scan Mode, move the
Joystick
right or left to place
the Bearing Line in the desired position. The location of the Bearing Line
will become the center point of the Sector Scan.
2)
Press the
FMS
Knob to display the cursor.
3)
Turn the large
FMS
Knob to place the cursor in the SECTOR SCAN field.
4)
Turn the small
FMS
Knob to select FULL, 60˚, 40˚, or 20˚ scan.
5)
If desired, readjust the Bearing Line with the
Joystick
to change the center
of the Sector Scan.
6)
Press the
FMS
Knob to remove the cursor.
Antenna stabilization
1)
To activate or deactivate the antenna stabilization, select the
MODE
Softkey.
2)
Select the
STAB ON
Softkey to activate antenna stabilization or select
the
STAB OFF
Softkey to deactivate. The current stabilization condition is
shown in the upper right of the weather radar display.
Weather Attenuated Color highlight (WAtCh
®
)
To activate or deactivate the
WATch
®
feature, select the
WATCH
Softkey. This
feature is only available in the Horizontal Scan Mode.
Weather Alert
To activate or deactivate Weather Alert, select the
WX ALRT
Softkey. Activating
and deactivating will also enable or inhibit the alert on the PFD.
Automatic standby
When the weather radar system is in the Weather or Ground Map Mode, upon
landing the system will automatically switch to Standby Mode.
Summary of Contents for SOCATA TBM850
Page 1: ...G1000 Integrated Flight Deck Cockpit Reference Guide System Software 0719 06 or later...
Page 2: ......
Page 4: ......
Page 121: ......