background image

RV-IN1501

 

RV INFOTAINMENT SYSTEM

INSTALLATION 

INSTRUCTIONS

Important Safety Information

 WARNING

See the 

Important Safety and Product Information

 guide in the 

product box for product warnings and other important 

information.

NOTICE

Failure to follow these cautions could result in damage to the 

vehicle or poor product performance.
This device must be installed according to these instructions.
Disconnect the vehicle's power supply before beginning to install 

this product.
Before applying power to this product, make sure it has been 

correctly grounded according to the installation instructions.
You must read all installation instructions before beginning the 

installation. If you experience difficulty during the installation, 

contact Garmin

®

 Product Support.

Connector Identification

Item Label

Description

Connector Details

ZONE 1 
LINE OUT

Line out 
connectors for 
zone 1

Left (white), right (red), and 
subwoofer (orange) 
RCA connectors

ZONE 2 
LINE OUT

Line out 
connectors for 
zone 2

Left (white), right (red), and 
subwoofer (orange) 
RCA connectors

None

Wiring harness 
connectors

Connects to the included and 
optional wiring harnesses

None

AM/FM antenna 
connector

Connects to either the vehicle's 
AM/FM antenna cable or an 
inline adapter attached to the 
vehicle's AM/FM antenna cable

SiriusXM

SiriusXM

®

 port

Connects to a compatible 
SiriusXM Connect vehicle tuner 
and antenna (sold separately)

USB (500 mA)

Reserved for manufacturer use
Compatible only with low-
current (<500 mA) USB devices

iPhone/iPod USB (1 A)

Interfaces with and charges 
supported smartphones and 
USB devices

AUX 1 
INPUT

Auxiliary input 1

Left (white) and right (red) RCA 
connectors

Item Label

Description

Connector Details

CAMERA 
AUDIO 
INPUT/AUX 
2 INPUT

Input for camera 
audio or for 
auxiliary 2

Left (white) and right (red) RCA 
connectors

None

Ethernet port

Connects to a FUSION 
PartyBus

 network

CAN 1

CAN BUS 1

Connects to RV control systems 
using an adapter (sold 
separately)

CAN 2

CAN BUS 2

Reserved for vehicle 
integration. Connects to the 
chassis CAN system using an 
adapter cable to support 
steering wheel controls.

MIC

Microphone input 3.5 mm mono microphone port

Connects to the included 
microphone for hands-free 
calling and voice input

None

GPS antenna

Connects to the included GPS 
antenna

VIDEO IN

Analog camera 
video input

4 RCA video connectors
Connects to up to four vehicle 
cameras, including forward, left 
mirror, right mirror, and backup 
cameras.

Wiring Harnesses

Power and Speaker Wiring Harness

The power and speaker wiring harness contains the main power 

and speaker connections for the system. The harness connects 

directly to the stereo   and to the vehicle wiring harness 

without modification. You can use this diagram to troubleshoot 

or to address non-default installation requirements.

Wire 
Color

Function

Notes

Yellow

Power (+)

Connects to the positive terminal of a 
12 Vdc power source capable of 
supplying 15 A.

Red

Ignition power

Connects to a separately-switched, 
12 Vdc connection, such as an ignition 
bus, to turn the stereo on and off.

Orange

Illumination

Connects to the vehicle's illumination 
wire to dim the stereo screen when the 
headlights are on. The gauge of the 
illumination wire must be suitable for the 
fuse supplying the circuit it is connected 
to.

NOTE: 

This wire is not used for all 

vehicles.

Black

Ground (-)

Connects to the negative terminal of a 
12 Vdc power source capable of 
supplying 15 A. You should connect this 
wire before connecting the yellow wire. 
All accessories connected to the stereo 
must share a common ground location.

Blue

Amplifier on

Connects to optional external amplifiers, 
enabling them to turn on when the 
stereo turns on.

2

Reviews: