Garmin Rino 650, Owner'S Manual

Page: 29 / 56

Customizing Your Device
Rino 650 Owner’s Manual 25
• Map Datum —sets the coordinate
system on which the map is
structured.
• Map Spheroid —shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
Heading Settings
You can customize the compass
settings.
Select
Setup > Heading .
• Display —sets the type of
directional heading on the compass.
• North Reference —sets the north
reference of the compass.
• Go to Line/Pointer —allows you
to select how the course appears.
◦ Bearing ( Small or Large )—the
direction to your destination.
◦ Course ( CDI )—your
relationship to a course line
leading to a destination.
• Compass —switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time ( Auto ), or turns the
compass off.
Altimeter Settings
Select Setup > Altimeter .
• Auto Calibration —allows the
altimeter to self-calibrate each time
you turn the device on.
• Barometer Mode
◦ Variable elevation —the
barometer functions while you
are moving.
◦ Fixed elevation —the
barometer functions while you
are stationary.