Garmin Rino 130 Owner'S Manual Download Page 77

Page: 77 / 132

Rino

130 Owner’s Manual

NIT

PERATION

OUTES

AGE

Stopping Navigation

To stop navigation, highlight the

Stop Navigation

option

on either the Navigation or Map page’s Option Menu or

select the

Stop

button on the Route Page.

Data Fields for the Route Page

When navigating a Route, the data displayed in the data

ﬁelds on the Route Page may be customized to provide

useful navigation information.

To select data ﬁeld options:

1. Use the

Thumb Stick

to highlight a data ﬁeld on

the Route Page and then press In to display the

data ﬁeld options.

2. Use the

Thumb Stick

to highlight the desired

option and press In to select that option for the

selected data ﬁeld.

Changing the Route Data Fields

Data ﬁeld Options for Route Page

•  Distance to Point
•  ETA To Point
•  ETE To Point
•  Leg Course
•  Leg Distance
•  Leg Time
•  Pointer
•  Sunrise At Point
•  Sunset At Point

Summary of Contents for Rino 130





































































































































Search results

Summary of Contents for Rino 130

Reviews:

Related manuals for Rino 130

Brands by name

Popular brands

Garmin Rino 130, Owner'S Manual

Search results

Summary of Contents for Rino 130

Reviews:

Related manuals for Rino 130

Brands by name

Popular brands