Connecting to a Solenoid Drive Unit
You must install the solenoid power cable to use a solenoid drive unit with theReactor 40 Mechanical autopilot
system. This cable is sold separately.
These instructions apply only to solenoid-type drive units.
1 If necessary, use the installation instructions provided with the solenoid drive unit to install it on your boat.
2 If your solenoid drive unit has cables connected, disconnect the cables.
3 Consult the documentation provided by the manufacturer of your solenoid drive unit to identify the
connections on your drive unit.
4 Connect the solenoid power cable (not included) to your solenoid drive unit, based on the diagram and
tables.
The solenoid power cable is 0.8 m (2.6 ft.) long, and cannot be extended.
+
‐
+
‐
+
‐
Item
Description
Notes
Solenoid power cable
Sold separately.
Starboard solenoid
Port solenoid
Bypass solenoid
May not be present in all systems.
13
