Device Information
Montana 600 Series Owner’s Manual
41
more information.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Remove the batteries or battery.
3. Slide the card holder
➊
toward
the top edge of the device and lift
up, as instructed in the battery
compartment.
➊
➋
4. Place the microSD card
➋
in the
device with the gold contacts facing
down.
5. Close the card holder.
6. Slide the card holder toward the
bottom of the device to lock it.
7. Replace the batteries (
).
8. Replace the battery cover, and turn
the D-ring clockwise.
Connecting the Device to a
Computer
Notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
1. Connect the USB cable to a USB
port on your computer.
2. Pull up the weather cap
➊
from the
mini-USB port
➋
.
➊
➋
3. Plug the small end of the USB
cable into the mini-USB port.
Your device and memory card
