manualshive.com logo in svg

Garmin Mobile 20, Pilot'S Manual

Share
Download
Garmin Mobile 20 Pilot'S Manual Download Page 119

107

Detailed Operation

XM Satellite Radio

Menu Pages 2-4

The second, third, and fourth option pages list Presets 3 through 15. The last option of each page takes you to 
the next page of options. The last option on Menu page 4 of this function returns you to the Main Menu page. 

Volume

The Volume control allows you to set the audio volume level, as well as mute the audio. 

1. In the XM radio function, press the 

Vol

 function key on the bottom of the display. 

2. Press the 

+

 or 

-

 menu item smart keys to increase or decrease the audio volume. 

Mute

1. In the XM radio function, press the 

Vol

 function smart key on the bottom of the display. 

2. Press the Mute menu item

 

key to mute or un-mute the audio. 

Note that the volume is muted when the GDL 69A is turned on. 

Channels

The Channel feature is used to navigate through the channels in the selected category. 

1. In the XM radio function, press the 

Chan

 function smart key on the bottom of the display. 

2. Press the 

 or 

 menu item

 

keys to up or down through the available channels. 

4. Press the 

Menu/Enter

 key to select the highlighted channel for listening. 

Saving XM Audio Radio Channel Presets

Summary of Contents for Mobile 20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands