Garmin Mobile 20 Page 118 Pilot'S Manual Download

Page: 118 / 152

106

Detailed Operation

XM Satellite Radio

XM Data and Audio Radio ID shown at top of screen

Save Preset

The Save Preset menu item allows you to store the displayed channel into a selected preset position for easy
later recall.

1. In the XM radio function, press the

Menu/Enter

key.

2. Press the

Save Preset

menu item

key on the Main Menu page. If necessary, press the

Next Page

key

to reach the Main Menu page.

3. Press the





arrow function smart keys to select the desired preset number.

4. Press the

Menu/Enter

key to save the channel into the selected preset number.

Last Channel

The Last Channel menu item allows you to return to the last tuned channel if the MX20 has been off and then
turned back on.

1. In the XM radio function, press the

Menu/Enter

key.

2. Press the

Last Channel

menu item

key on the Main Menu page. If necessary, press the

Next Page

key

to reach the Main Menu page.

3. The last tuned channel in the XM Radio function will be selected.

Summary of Contents for Mobile 20

























































































































































Search results

Summary of Contents for Mobile 20

Reviews:

Related manuals for Mobile 20

Brands by name

Popular brands

Garmin Mobile 20, Pilot'S Manual

Search results

Summary of Contents for Mobile 20

Reviews:

Related manuals for Mobile 20

Brands by name

Popular brands