Garmin iQue 3000, Operating Instructions Manual

Page: 109 / 120

105 iQue
®
3000 Operating Instructions
C
ONNECTION AND
N
ETWORK
P
REFERENCES
> N
ETWORK
P
REFERENCES
To edit a service template:
1. Tap the Home icon . Select All from the pick list in the upper-right corner. Then tap the Prefs icon .
2. Tap the pick list in the upper-right corner of the screen and select Network .
3. In the Network Preferences screen, tap the Service pick list. Tap the template you want to view details for. Then tap Details .
4. Tap the Connection Type pick list, and select a connection type:
• PPP for Point-to-Point protocol. Select this type if you are unsure which you need. If PPP doesn’t work, ask your ISP or your system
administrator for the correct connection type.
• SLIP for Serial Line Internet protocol.
• CSLIP for Compressed Serial Line Internet protocol.
5. Tap the Idle Timeout pick list to specify how long your handheld waits to drop your connection when you switch out of a TCP/IP
application, and select Immediate, 1 minute, 2 minutes, 3 minutes, or Never (until the power is off or your handheld times out).
The Never option works best with the Palm
™
Modem accessory.
6. Enter a DNS number following the instructions in the next section.
7. Tap
OK .
To delete a service template:
1. Tap the Home icon . Select All from the pick list in the upper-right corner. Then tap the Prefs icon .
2. Tap the pick list in the upper-right corner of the screen and select Network .
3. In the Network Preferences screen, tap the Service pick list. Tap the template you want to delete.
4. Tap the Menu icon .
5. Tap the Service menu, and then tap Delete .
6. Tap OK .