Coordinates
: Sets the format used for geographical position
coordinates.
Datum
: Sets the coordinate system used by the map.
Speed/Distance
: Sets the unit of measure for distance.
Temperature
: Sets the temperature units to Fahrenheit (°F) or
Celsius (°C).
Pressure
: Sets the pressure units.
Bearing
: Sets the north reference used on the compass to true
or magnetic north.
Changing the Device Language
1
From the main menu, select
Setup
>
Language
.
2
Select a language.
Adding Owner Information
1
From the main menu, select
Setup
>
Owner Info
.
2
Select
OK
, enter your information, and select .
Device Information
Support and Updates
Go to
for easy access to these services for
inReach devices.
• Product registration
• Firmware updates
• Data uploads and syncing your device with your account
Attaching the Spine Mount Adapter
1
Remove the short screw
À
from the carabiner strap
Á
.
2
Secure the spine mount adapter
À
over the back of the
device using the long screw
Á
included with the device.
TIP:
The spine mount adapter fits over the carabiner strap.
You can attach the adapter over the strap or remove the
strap.
Attaching a Lanyard
1
Insert the loop of the lanyard through the slot in the device.
2
Thread the other end of the lanyard through the loop, and pull
it tight.
3
If necessary, attach the lanyard to your clothing or backpack
to tether it during an activity.
Locking and Unlocking the Keys
You can lock the keys to prevent inadvertent key presses.
1
Select >
Lock Screen
.
2
Select >
Unlock
to unlock the keys.
Device Care
NOTICE
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
The device is water resistant to IEC Standard 60529 IPX7. It can
withstand accidental immersion in 1 meter of water for 30
minutes. Prolonged submersion can cause damage to the
device. After submersion, be certain to wipe dry and air dry the
device before using or charging.
Thoroughly rinse the device with fresh water after exposure to
chlorinated or salt water environments.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
Troubleshooting
Maximizing Battery Life
• Turn on the
Extended Tracking
setting (
).
• Reduce the backlight timeout (
).
• Reduce the value of the tracking
Log Interval
and
Send
Interval
settings (
).
• Turn off Bluetooth wireless technology (
).
• Turn off ANT+ wireless technology (
).
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
1
Hold and until the device turns off.
2
Hold to turn on the device.
Restoring All Default Settings
You can restore all device settings to the factory default values.
Device Information
5
Summary of Contents for inReach Mini
Page 1: ...INREACH MINI Owner sManual...
Page 4: ......