Garmin IMPACT, Owner'S Manual

Page: 5 / 10

Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Device Overview
À
Hold to open and close menus.
Press to move to the next item in a menu.
Á
Hold to turn on the device.
Press to select items in a menu.
Press to move to the next screen.
Â
Power and
data port Connect a cable to charge your device or transfer
files.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
1 Plug the small end of the USB cable into the charging port on
your device.
2 Plug the large end of the USB cable into a USB port on your
computer.
3
Charge the device completely.
Turning On the Device
Hold .
Turning Off the Device
1 Hold to open the menu.
2
Select Power Off > Yes .
Attaching the Sensor to a Bat
1
Insert the knob of your bat into the narrow end of the mount.
2
Insert the device in the opening on the mount.
NOTE: When positioning the device, verify that the button
À
aligns with the oval-shaped indentation
Á
on the mount.
Pairing Your Smartphone
Your Impact device must be paired directly through the Impact
app, instead of from the Bluetooth ® settings on your smartphone.
You can pair your Impact device with your smartphone during
the initial setup or through the Bluetooth menu.
1
From the app store on your smartphone, install and open the
Garmin
®
Impact app.
2
Select > PAIR DEVICE .
3 From the Impact device, hold to open the menu.
4 Select Bluetooth > Pair Phone .
5
Follow the instructions in the app to complete the pairing and
setup process.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Batter Profiles
When you first install the Impact app, you are prompted to set
up a batter profile. You can add batter profiles, or edit existing
profiles at any time.
Selecting a Batter Profile
1
From the Impact app, select PROFILE .
2
Select the current batter profile image.
3
Select a batter profile.
Adding a Batter Profile
1 From the Impact app, select PROFILE .
2
Select the current batter profile image.
3
Select .
4
Enter the batter profile information.
Editing a Batter Profile
1 From the Impact app, select PROFILE .
2
Select the current batter profile image.
3
Select a batter profile.
4
Select .
Introduction 1