GWS 10 installation instructions
EN–
EN
GWS 10 Wind Sensor Installation Instructions
To obtain the best possible performance, install your GWS 10 Wind Sensor according to the following instructions. If you experience difficulty
during the installation, contact Garmin Product Support, or seek the advice of a professional installer.
The GWS 10 communicates with NMEA 2000
®
-compatible chartplotters and displays. Refer to
for a list of compatible
devices.
See the
Important Safety and Product Information
guide in the product box for product warnings and other important information.
Cautions
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
When drilling or cutting, always check the opposite side of the surface. Be aware of fuel tanks, electrical cables, and hydraulic hoses.
Use caution when working from heights.
•
•
•
Product Registration
Help us better support you by completing our online registration at
.
For future reference, write the serial number assigned to your GWS 10 in the space provided. It is located on a sticker on the unit.
Serial number
Contact Garmin
Contact Garmin Product Support if you have any questions while using your GWS 10. In the USA, go to
, or contact
Garmin USA by phone at (913) 397-8200 or (800) 800-1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to
Contact Support
for in-country support information, or contact Garmin (Europe) Ltd. by
phone at +44 (0) 870.8501241.
Packing List and Accessories
Before installing your unit, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer
immediately.
GWS 10 with GMI 10 Bundle Package or GWS 10 Package:
GWS 10 Wind Sensor unit
GWS 10 Wind Sensor mounting hardware
2 NMEA 2000 terminators (1 female, 1 in-line)
NMEA 2000 backbone cable
Field-installable connector
In-line lightning arrestor
GWS 10 Installation Instructions
•
•
•
•
•
•
•
GWS 10 with GMI 10 Bundle Package:
GMI 10 unit
Protective cover
GMI 10 flush mount hardware
Power/data wiring harness
NMEA 2000 power cable
NMEA 2000 drop cable
NMEA 2000 T-connector and terminator kit
GMI 10 Installation Instructions
and
GMI 10 Quick Start Manual
Additional Optional Items (not included):
Additional NMEA 2000 network components
Tools Needed (not included):
Phillips screwdriver
Drill and drill bits
•
•
•
•
•
•
•
•
•
•
•
