Post Installation Configuration & Checkout
190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 9
Page 6-16
Altitude Alert Deviation (Panel Mount Units Only)
This field determines the amount of altitude difference from selected altitude to generate an altitude alert. Range is
200 ft to 999 ft.
Restore Pages On Power-up (Panel Mount Units Only)
To save the selected pages set in normal operating mode as the new default page settings next time the unit is power
up, select YES.
Figure 6-17 Altitude Alert Deviation and Restore Page
Flash Message Indicator (Panel Mount Units Only - Software v2.05 and Later)
To have “MSG” flash when a new alert occurs, select YES. If No is selected, the MSG indicator is visible when an alert
is active but does not flash.
Figure 6-18 Flash Message Indicator Page
Bluetooth (GTX 345 Only)
To transmit information to a PED using Bluetooth, select ENABLED.
Figure 6-19 Bluetooth Page
Enhanced Surveillance
Enhance
d
surveillance provides additional data available for interrogation by ground stations. To enable replies with
additional data, select ENABLED.
Figure 6-20 EHS Page