Post Installation Configuration & Checkout
190-01499-02
GTX 3X5 Transponder TSO Installation Manual
Rev. 9
Page 6-30
ADS-B in Processing
Select ENABLED.
Figure 6-42 ADS-B In Processing Page
Aircraft Tail Number
Set this to the registered aircraft tail number.
Address
Set the ICAO address to either octal or hex format. If the tail number is recognized as a US registered tail number, the
ICAO address will be pre-filled by the GTX. It only needs to be compared to the aircraft registration records. Selections
are:
Figure 6-43 Aircraft Tail Number and Address Page
Allow Pilot To Edit Flt ID
Select YES to let the pilot change the flight ID.
Figure 6-44 Allow Pilot to Edit Flight ID Page
• Octal
• Hex