Garmin GTN 625Xi, Pilot'S Manual

Page: 49 / 534

Get Started
190-02327-03 Rev. C Pilot’s Guide 2-5
Databases
NOTE
The navigator supports SD cards in the FAT32 format only, with capacities ranging
between 8 GB and 32 GB.
Databases are stored in the unit’s internal memory. To view update cycles, or to
purchase individual databases or database packages, go to flyGarmin.com .
There are two methods for loading and updating databases. Do not attempt either
of these while in flight (on ground only).
•
Load databases via SD card. Once loading completes, you may power off
the unit and remove the card.
•
Transfer databases from a Flight Stream 510 wireless datacard.
This
method requires the Garmin Pilot app on a portable electronic device.
1
Optional third-party database.
SUPPORTED DATABASES
Basemap
Bodies of water, geopolitical boundary, and road
information
ChartView 1
Jeppesen terminal procedures
FliteCharts
AeroNav terminal procedures
Navigation
Airport, NAVAID, waypoint, and airspace information
(Garmin or Jeppesen)
Obstacles
Obstacle and wire data
SafeTaxi
Airport surface diagrams
Terrain
Terrain elevation data
Aviation Database Errors
Visit flyGarmin.com to report any
discrepancies in database
information. These may include
incorrect procedures, inaccurate
depictions of terrain, obstacles
and fixes, or errors with any
other screen element used for
navigation or communication
purposes.
For information regarding third-party
navigation databases, go to
jeppesen.com .