Garmin GTN 625Xi, Pilot'S Manual

Page: 42 / 534

1-18 Pilot’s Guide 190-02327-03 Rev. C
System at a Glance
Screen Captures
FEATURE REQUIREMENTS
•
SD card in the FAT32 format, with memory capacity between
8 GB and 32 GB
Save images to an SD card at any time using a screen capture.
1. Verify unit power is off and the card slot is empty.
2. Insert an SD card into the slot.
3. Power on the unit and go to the page of interest.
4. Push and hold the control knob.
5. With the knob depressed, push and release the
Home
key.
A camera icon momentarily shows in the annunciator bar indicating whether or not
the screen capture is successful.
Screen Capture Successful
Image automatically saves to
the
print folder in the SD card
root directory.
To view saved images, remove
the SD card and open the
print
folder on a computer.
Screen Capture Failed
Failures can occur if the SD card is:
•
Full
•
Not present or fully seated
•
Corrupt and needs reformatting
•
Damaged