Garmin GTN 625Xi, Pilot'S Manual

Page: 354 / 534

5-46 Pilot’s Guide 190-02327-03 Rev. C
Hazard Awareness
To complete activation:
1. Move aircraft within satellite range and power on the unit.
2. Tap Weather > Connext Weather > Menu > Connext Settings >
Datalink Status
>
Connext Registration
>
Access Code
.
3. Enter the required code, then tap
Register
.
Deactivate Connext Unit Registration
You can deactivate your registration by entering an invalid access code in the
Connext Registration pop-up window. This prevents the unit from making any
further requests from Connext. Requests made after deactivation will fail.
From the GSR Status page:
1. Tap Connext Registration > Access Code .
2. Tap CLR to remove the current access code.
3. Enter an invalid code, then tap Register .
Deactivating your Connext registration does not cancel your subscription.
If access code and system ID are
correct, the airframe registration
details will display.
Current
Registration
Detail