4-10
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
FPL
4.2.1.6
Load Procedures
The Load Procedure selection from the Waypoint Options will start the
Procedures function. Refer to the Procedures section for complete information.
1. On the Active Flight Plan page, touch the desired waypoint in
the flight plan. The Waypoint Options menu opens.
2. Touch the
Load Procedures
key to go to the Procedure
function for adding procedures to the selected flight plan.
Touch to Select
an Approach
Touch to Select
an Arrival
Touch to Select
a Departure
Figure 4-18 Load Procedures Wpt Option
NOTE:
In software v5.13 and earlier, for some procedures, due to very
small position differences in the database, consecutive flight plan legs do
not match up. The total effect on navigational guidance is negligible. The
LOC BC 13 at KSLE via UBG shown below is an example of this.
Procedure Flight Plan
Leg Discrepancy
Figure 4-19 Procedure Flight Plan Leg Position Difference
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
