14-17
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Utilities
9. After completing the Trip Planning selections, touch the
Compute Data
key to display the trip statistics.
Trip Statistics
Touch to Toggle
Between Statistics
and Data Input
Figure 14-21 Utility Trip Planning Page With Computed Data (Point-To-Point Mode)
NOTE: When Local Time is selected in the Setup-Date/Time feature, Sunrise/
Sunset calculations in the Trip Planning feature are based on the From
waypoint time zone. For instance, a flight plan originating in the Pacific
time zone and ending in the Central time zone would show Sunset/Sunrise
times at the destination in Pacific time. This potential offset does not occur
when UTC time is used.
14.4.2 Flight Plan Mode
1. Touch the
Mode
key to select Flight Plan mode, if required.
Touch to Select
P-to-P or Flight
Plan Mode
Touch to Select
Flight Plan
From Catalog
Touch to Select
Expected Average
Ground Speed
Touch to Select
Departure Time
Touch to Select
Departure Date
Touch to Select
Flight Plan Leg
Touch to Toggle
Between Statistics
and Data Input
Touch to Toggle
Sensor Data Use
Figure 14-22 Utility Trip Planning Page Edit Input Data View (Flight Plan Mode)
2. Touch the
Flight Plan
key to select the flight plan.
Touch to Scroll List
Touch to Select
Flight Plan (Active
FPL Shown)
Figure 14-23 Select Flight Plan
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...
