14-8
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Utilities
14.1.5 Before/After Target Waypoint
This setting designates whether the offset distance defines a point before you
reach the target reference waypoint or after you reach the waypoint. The “After”
selection is not available for the last waypoint in a flight plan.
1. While viewing the VCALC page, touch the
Before/After
key.
2. Touching the
Before/After
key will toggle between before
and after the Target Waypoint.
14.1.6 Target Waypoint
Select the waypoint in the flight plan that will be used for planning a descent.
When using a flight plan, the target waypoint is a reference that can be specified
from the waypoints contained in the flight plan. By default, the last waypoint in
the flight plan is selected.
1. While viewing the VCALC page, touch
Target Waypoint
.
Figure 14-9 Select VCALC Target Waypoint List
2. A list of the remaining waypoints in the flight plan will be
shown. Touch the desired waypoint to select it as the Target
Waypoint.
Summary of Contents for GTN 625
Page 608: ...This page intentionally left blank ...
Page 609: ......
Page 610: ...190 01004 03 Rev P ...