background image

190-01639-00

GSU 75 ADAHRS Installation Manual

Rev. 6

Page 1-3

1.3 Interface Summary

The following is an interface summary for the GSU 75, GTP 59 and GMU 44.  See 

Appendix B

 for 

connection details.

GTP 59 to GSU 75 Interface: Power, Analog

GMU 44 to GSU 75 Interface: Power, RS-232, RS-485

3 ARINC 429 ADC (Air Data Computer) Inputs (individually selectable high or low speed)

3 ARINC 429 ADC Outputs (individually selectable high or low speed)

3 ARINC 429 AHRS (Attitude and Heading Reference System) Inputs (individually selectable 
high or low speed)

4 ARINC 429 ADAHRS (Air Data and Attitude Heading Reference System) Outputs (High 
Speed; 3 Independent, 1 Redundant; configurable to all output only AHRS data or combined ADC 
and AHRS data)

1 RS-232 ADC Input/Output from GIA 6X (Garmin Integrated Avionics Units)

2 RS-232 AHRS Inputs/Outputs from GIA 6X (Garmin Integrated Avionics Units)

2 PPS Inputs

4 Discrete Inputs

2 System ID Program pins

2 Aircraft Power Inputs

1.4 Technical Specifications

1.4.1 Environmental Qualification Form

The Environmental Qualification Forms are available directly from Garmin under the following 
part numbers:
GSU 75 Environmental Qualification Form, Garmin part number 005-00770-01
GMU 44 Environmental Qualification Form, Garmin part number 005-00164-31

1.4.2

Physical Characteristics

Table 1-1   GSU 75 with 117-00608-00 Rack

Characteristic

Specification

Weight, Unit Only

1.36 lbs (0.62 kg)

Weight, Unit with Rack and Connectors

1.72 (0.78 kg)

Height (w/Rack and Connectors)

2.76 inches (70.1 mm)

Width (w/Rack and Connectors)

3.00 inches (76.2 mm)

Depth (w/Rack and Connectors)

6.57 inches (166.9 mm)

340095

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for GSU 75 Series










































































Reviews: