Garmin GRN-010-02088-01, Owner'S Manual

Page: 39 / 58

Using the Flashlight
NOTE: Using the flashlight can reduce battery life. You can reduce the brightness or flash frequency to extend
the life of the battery.
1 Select Flashlight > ENTER.
2 If necessary, use the brightness slider to adjust the brightness.
3 If necessary, select a different flash type.
0 No strobe, constant beam.
1 through 9 Number of strobes per second.
SOS
Emergency strobe.
NOTE: Wi‑Fi, Bluetooth, and ANT+ connections are disabled in SOS mode.
Satellite Page
The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.
GPS Satellite Settings
Select Satellite > MENU.
Use With GPS On: Allows you to turn the GPS on.
Track Up: Indicates whether satellites are shown with rings oriented with north toward the top of the screen or
oriented with your current track toward the top of the screen.
Single Color: Allows you to select whether the satellite page is displayed in multicolor or single color.
Set Location On Map: Allows you to mark your current location on the map. You can use this location to create
routes or search for saved locations.
AutoLocate Position: Calculates your GPS position using the Garmin AutoLocate ® feature.
Satellite Setup: Sets the satellite system options ( Satellite Settings, page 34 ).
Customizing the Device
Customizing the Data Fields
You can customize the data fields displayed on each main page.
1 Open the page for which you will change the data fields.
2 Select MENU.
3 Select Change Data Fields.
4 Select the new data field.
5 Follow the on-screen instructions.
Customizing the Device 33