Garmin GPSMAP GPSMAP 196, Pilot'S Manual

Page: 65 / 132

To create a new waypoint by entering location
coordinates:
1. Press ENTER/MARK to create a waypoint (or use your
favorite method discussed in previous sections). The new
waypoint is created with the next available waypoint number
and the receiver’s last known location as the default location.
2. On the New Waypoint Page, use the ROCKER to highlight
the Location field, and press ENTER . Use the ROCKER
to enter the location coordinates, and press ENTER when
finished.
3. To change any of the other information, highlight the
appropriate field, and press ENTER . Use the ROCKER to
enter the new information.
4. After entering your changes, highlight OK , and press
ENTER .
To change the location of a waypoint, highlight the character you want to
change in the Location field. Press up or down on ROCKER to change the
character. Repeat until the new location is entered.
GPSMAP 196 Pilot’s Guide 57
B
ASIC
O
PERATION IN
L
AND
M
ODE
> F
OLLOWING A
L
AND
R
OUTE