Garmin GPSMAP GPSMAP 196 Pilot'S Manual Download Page 44

Page: 44 / 132

Panel Page

The Panel Page shows GPS-derived data in a graphical format,

similar to an instrument panel. Keep in mind the differences between

this page and your mechanical instruments, as your mechanical

panel instruments use sensors that provide information different

from that derived using GPS. The Panel Page appears only when the

GPSMAP 196 is in Aviation Mode.
The Panel Page shows a graphic Horizontal Situation Indicator

(HSI) surrounded by additional indicators.

Panel Page

Ground Speed

Next Waypoint

and Distance

to it

Altitude

Vertical Speed

Estimated

Time Enroute

Turn Rate

Indicator

HSI showing Course Deviation Indicator (CDI)

CDI Scale

The graphic HSI depicts the course to the destination or the next

waypoint in a route, current ground track, off course error, and a

To/From indication. The rotating compass indicates your current

ground track at the top of the page.

The course pointer and course deviation needle indicate the course

and whether you are on the course. A bug indicator provides

information to guide you back to the course if you stray off course.
If you move off course, the Course Deviation Indicator, or needle,

indicates how far off course you are, left or right, based on its

placement along the course deviation scale. To get back on course

and center the needle, steer toward the needle.
The course deviation scale setting is adjustable for ±0.25, 1.25 or 5.0

(nautical mile, statute mile, or kilometer) full-scale deﬂection. The

course deviation scale appears on the lower right corner of the HSI.

To change the Panel Page layout:

1. Press

MENU

while on the Panel Page.

2. Highlight

Setup Page Layout

, and press

ENTER

3. Select a layout option, and press

ENTER

GPSMAP 196 Pilot’s Guide

VIATION

ODE

AGES

ANEL

AGE

Summary of Contents for GPSMAP GPSMAP 196





































































































































Search results

Summary of Contents for GPSMAP GPSMAP 196

Reviews:

Related manuals for GPSMAP GPSMAP 196

Brands by name

Popular brands

Garmin GPSMAP GPSMAP 196, Pilot'S Manual

Search results

Summary of Contents for GPSMAP GPSMAP 196

Reviews:

Related manuals for GPSMAP GPSMAP 196

Brands by name

Popular brands