Garmin GPSMAP A12, Owner'S Manual

Page: 52 / 74

Opening the Media Player
Before you can open the media player, you must connect a
compatible device to the chartplotter.
Select A/V, Gauges, Controls > Media .
Icons
NOTE: Not all devices have these icons.
Icon Description
Saves or deletes a channel as a preset
Repeats all songs
Repeats one song
Searches for stations or skips songs
Shuffles
Selecting the Media Device and Source
You can select the media source connected to the stereo. When
you have multiple stereo or media devices connected on a
network, you can select the device from which you want to play
music.
NOTE: You can play media only from sources that are
connected to the stereo.
NOTE: Not all features are available on all media devices and
sources.
1
From the media screen, select Devices , and select the
stereo.
2
From the media screen, select Source , and select the media
source.
NOTE: The Devices button only appears when more than
one media device is connected to the network.
NOTE: The Source button only appears for devices that
support multiple media sources.
Playing Music
Browsing for Music
1
From the media screen, select Browse or Menu > Browse .
2
Select Select or select an option.
Enabling Alphabetical Search
You can enable the alphabetical search feature to find a song or
album in a large list.
From the media screen, select Menu > Installation > Alpha
Search .
Setting a Song to Repeat
1 While playing a song, select Menu > Repeat .
2 If necessary, select Single .
Setting All Songs to Repeat
From the media screen, select Menu > Repeat > All .
Setting Songs to Shuffle
1
From the media screen, select Menu > Shuffle .
2
If necessary, select an option.
Joining the FUSION PartyBus ™ Network
You can play music from other compatible stereos connected to
the FUSION PartyBus network. One FUSION PartyBus stereo
must be connected to the chartplotter using the NMEA 2000
network.
NOTE: A FUSION PartyBus zone stereo, such as the Apollo
™
SRX400 zone stereo, cannot stream sources to other FUSION
PartyBus devices on the network. Because of this, zone stereos
do not appear as available sources in the chartplotter.
1
From the media screen, select Source .
NOTE: After few moments, the compatible FUSION PartyBus
stereos appear as sources.
2
Select the FUSION PartyBus stereo.
3
If necessary, select Source , and select a different source
connected to the FUSION PartyBus stereo.
To leave the FUSION PartyBus network, you can select Source
> Leave PartyBus .
Adjusting the Volume
Muting the Media Volume
1
From the media screen, select .
2
If necessary, select Select .
Enabling and Disabling Zones
If you have wired your vessel's speakers into zones, you can
enable needed zones and disable unused zones.
1
From the media screen, select Menu > Audio Levels >
Enable/Disable Zones .
2 Select a zone.
VHF Radio
NOTE: These features are available on some stereos with a
VHF receiver.
Scanning VHF Channels
Before you can scan VHF channels, you must set the source to
VHF.
You can monitor VHF channels saved as presets for activity and
automatically switch to an active channel.
From the VHF media screen, select Scan .
Adjusting the VHF Squelch
NOTE: This feature is available on some stereos with a VHF
receiver.
1
From the VHF source page, select Menu > Squelch .
2
Use the slider bar to adjust the VHF squelch.
Radio
To listen to AM or FM radio, you must have a suitable marine
AM/FM antenna properly connected to the stereo and be within
range of a broadcasting station. For instructions on connecting
an AM/FM antenna, see the stereo installation instructions.
To listen to SiriusXM
®
radio, you must have the appropriate
equipment and subscriptions ( SiriusXM Satellite Radio ,
page 45 ). For instructions on connecting a SiriusXM Connect
Vehicle Tuner, see the stereo installation instructions.
To listen to DAB stations, you must have the appropriate
equipment ( DAB Playback , page 45 ). For instructions on
connecting a DAB adapter and antenna, see the installation
instructions provided with your adapter and antenna.
Setting the Tuner Region
1 From the media screen, select Menu > Installation > Tuner
Region .
2
Select an option.
Changing the Radio Station
1 From the media screen, select an applicable source, such as
FM .
2
Select or to tune to a station.
Changing the Tuning Mode
You can change how you select a station for some media types,
such as FM or AM radio.
NOTE: Not all tuning modes are available for all media sources.
44 Media Player