Garmin GPSMAP 96 - Hiking, Pilot'S Manual

Page: 80 / 150

96/96C Owner’s Manual
M
aIn
p
aGeS
>
Active Route Page Options Menu
The following route options are available by pressing
Menu .
Active Route
Options Menu
Deactivate
—stops route navigation.
Edit on Map —allows you to edit the route on the
map.
Reverse Route —reverses the order of the route.
Select Approach
—(Aviation Only) allows you
to select the final course segment of a published
approach, replacing the final destination airport (in a
Go To or route) with the sequence of waypoints for
the selected approach. The approaches provide only
the final course segment, usually from final approach
fix (FAF) to missed approach point (MAP), and are
based on existing GPS, RNAV, VOR, NDB, localizer,
or ILS approach procedures. All approach procedures
are flown as a sequence of waypoints in the route. In
order to select an approach and add the waypoints
to the route, the final destination in the “Go To” or
“Route” must be an airport with a published approach.
Set Fuel Flow —allows you to enter fuel consumption
rate and distance. Intended for use in the Aviation
Mode, but can be applied to other modes.
Change Data Fields —allows you to customize the
data fields shown on the Active Route Page.
Saving the Active Route
You can save the current route from the Current
Route Page. Press Menu to save the route. Press
ENTER when Save Route is highlighted. Your route
is automatically saved, using the starting point and
destination as the route name. Press
ENTER
when
OK
is highlighted to complete saving the route.