96/96C Owner’s Manual
B
aSIc
o
peratIon
>
Select Approach
The Select Approach option replaces a destination
airport with the sequence of waypoints for the
selected approach. Keep in mind that the airport must
have a published approach (GPS, RNAV, VOR, NDB,
localizer, or ILS) and only the final course segment
(from final approach fix to missed approach point) of
the published approach is available in the
GPSMAP 96/96C.
Approach
Identifier
NOTE:
When using a route, and on the final leg
of the route to the destination airport, the Select
Approach option allows you to quickly retrieve
and select available approaches. This option
overrides your current route. The original route
is still available for later use. The approaches
provided in the Jeppesen database are for
monitoring purposes only. The GPSMAP 96/96C
is not an IFR-approved instrument and should
not be used as a primary source of navigation
guidance in instrument conditions.
To select an approach using the Go To
page:
1. Press
DIRECT TO
D
to show the
Go To
Page.
2. Use the
ROCKER
to highlight
Approach
.
3. Use the
ROCKER
to select the approach from
the third field, and press
ENTER
.
4. Use the
ROCKER
to select
Vectors
or
FAF
,
and press
ENTER
. The GPSMAP 96/96C
removes the destination airport from the Go To
and replaces it with the approach waypoints.
Summary of Contents for GPSMAP 96 - Hiking
Page 1: ...GPSMAP 96 96C portable aviation receiver pilot s guide...
Page 149: ......
