Garmin GPSMAP 96 - Hiking Pilot'S Manual Download Page 145

Page: 145 / 150

96/96C Owner’s Manual

ppendIx

FCC Compliance

The GPSMAP 96/96C complies with Part 15 of the FCC

interference limits for Class B digital devices FOR HOME

OR OFFICE USE. These limits are designed to provide

more reasonable protection against harmful interference in a

residential installation, and are more stringent than “outdoor”

requirements.
Operation of this device is subject to the following conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.
This equipment generates, uses, and can radiate radio

frequency energy and may cause harmful interference to

radio communications if not installed and used in accordance

with the instructions. However, there is no guarantee that

interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

The GPSMAP 96/96C does not contain any user-serviceable

parts. Repairs should only be made by an authorized Garmin

service center. Unauthorized repairs or modifications could

result in permanent damage to the equipment and void your

warranty and your authority to operate this device under Part

15 regulations.

Declaration of Conformity (DoC)

Hereby, Garmin, declares that the GPSMAP 96/96C

is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the

Garmin Web site for your Garmin product:

www.

garmin.com/products/gpsmap96/

www.garmin.

com/products/gpsmap96c/.

Click

Manuals

, and then

select the

Declaration of Conformity

link.

Summary of Contents for GPSMAP 96 - Hiking























































































































































Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands

Garmin GPSMAP 96 - Hiking, Pilot'S Manual

Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands