96/96C Owner’s Manual
a
ppendIx
>
To set up Loran TD from the Setup Menu:
1. Press
MENU
twice to show the Main Menu,
then press again to show the Setup Menu.
2. Use the
ROCKER
to highlight the Location
icon and press
ENTER
to show the Location
Setup Page.
2. Highlight the “Position Format” field, and press
ENTER
to show the format list.
3. Highlight “Loran TD” press
ENTER
to show the
Loran Setup Page.
4. To change the settings of any of the five fields,
highlight the field, press
ENTER
select or enter
the setting, then press
ENTER
.
6. When finished, highlight
Save
, and press
ENTER
.
Loran TD Setup Page
If the active GRI Chain, secondary stations, or offsets
have been changed since the waypoint was created,
the waypoint now references the active GRI-chain
and secondary stations and adjust the TD coordinates
accordingly. Remember that the GPSMAP 96/96C
is not relying on the LORAN signal for navigation
and actually converts the TD coordinate to a useful
LAT/LON coordinate before storing the waypoint to
memory or using it for navigation. Because of this,
the unit can navigate to a TD coordinate anywhere in
the world.
Summary of Contents for GPSMAP 96 - Hiking
Page 1: ...GPSMAP 96 96C portable aviation receiver pilot s guide...
Page 149: ......
