Garmin GPSMAP 96 - Hiking Pilot'S Manual Download

Page: 12 / 150

96/96C Owner’s Manual

ettInG

tarted

Adjusting the Backlight and

Contrast

You may want to adjust the backlight to see the screen

better. You can also adjust the contrast if using the

GPSMAP 96.

To adjust the backlight level:

1. Press and quickly release the

POWER

key.

2. Press the

ROCKER

up to increase the

brightness or down to decrease the brightness.

3. Press

ENTER

QUIT

to close.

GPSMAP

96C Backlight

Adjustment

GPSMAP 96

Backlight and

Contrast Adjustment

To adjust the contrast level: (GPSMAP 96

only):

1. Press and quickly release the

POWER

key.

2. Press the

ROCKER

to the right to increase the

contrast or to the left to decrease the contrast.

3. Press

ENTER

QUIT

to close the Backlight/

Contrast adjustment window.

Summary of Contents for GPSMAP 96 - Hiking























































































































































Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands

Garmin GPSMAP 96 - Hiking, Pilot'S Manual

Search results

Summary of Contents for GPSMAP 96 - Hiking

Reviews:

Related manuals for GPSMAP 96 - Hiking

Brands by name

Popular brands