Garmin GPSMAP 9 3 Series, Owner'S Manual

Page: 37 / 222

Getting Started with the ActiveCaptain App
You can connect a mobile device to the GPSMAP device using the ActiveCaptain app. The app provides a
quick and easy way for you to interact with your GPSMAP device and complete such tasks as sharing data,
registering, updating the device software. When configured, you can also receive mobile device notifications.
1 From the GPSMAP device, select Vessel > ActiveCaptain.
2 From the ActiveCaptain page, select Wi-Fi Network > Wi-Fi > On.
3 Enter a name and password for this network.
4 Insert a memory card in the GPSMAP device's card slot (
Memory Cards, page 7 ).
5 Select Set ActiveCaptain Card.
NOTICE
You might be prompted to format the memory card. Formatting the card deletes all information saved on the
card. This includes any saved user data, such as waypoints. Formatting the card is recommended, but not
required. Before formatting the card, you should save the data from the memory card onto the device internal
memory (
Copying User Data from a Memory Card, page 189 ). After formatting the card for the ActiveCaptain
app, you can transfer the user data back to the card ( Copying All User Data to a Memory Card, page 189 ).
Be sure the card is inserted each time you want to use the ActiveCaptain feature.
6 From the application store on your mobile device, install and open the ActiveCaptain
app.
TIP: You can scan this QR code using your mobile device to download the app.
7 Bring the mobile device within 32 m (105 ft.) of the GPSMAP device.
8 From your mobile device settings, open the Wi‑Fi
® connections page, and connect to the
GPSMAP device, using the name and password you entered in step 3.
Enabling Smart Notifications
WARNING
Do not read or reply to notifications while operating the vessel. Failure to pay attention to the conditions on the
water can result in vessel damage, personal injury, or death.
Before your GPSMAP device can receive notifications, you must connect it to your mobile device and to the
ActiveCaptain app.
1 From the GPSMAP device, select ActiveCaptain > Smart Notifications > Enable Notifications.
2 Turn on Bluetooth technology in the mobile device settings.
3 Bring the devices within 10 m (33 ft.) of each other.
4 From the ActiveCaptain app on the mobile device, select Smart Notifications > Pair with Chartplotter.
5 Follow the on-screen instructions to pair the app to the GPSMAP device.
6 When prompted, enter the key on your mobile device.
7 If necessary, adjust which notifications you receive in your mobile device settings.
ActiveCaptain App 23