background image

United States. Contact SiriusXM by phone at (877) 438-9677 

or go to 

www.siriusxm.ca/activatexm

 to subscribe in Canada. 

4

Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but 

can take up to an hour. For the SiriusXM Connect Tuner to 

receive the activation message, it must be turned on and 

receiving the SiriusXM signal.

5

If the service is not activated within the hour, go to 

http://care.siriusxm.com/refresh

 or contact SiriusXM by phone 

at 1-855-MYREFRESH (697-3373).

Customizing the Channel Guide

SiriusXM radio channels are grouped in categories. You can 

select the categories of channels that appear in the channel 

guide.

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Media

 > 

Browse

 > 

Channel

.

• If the media device is a GXM

 antenna, select 

Media

 > 

Category

.

Saving a SiriusXM Channel to the Presets List

You can save your favorite channels to the presets list.

1

Select 

Media

.

2

Select the channel to save as a preset.

3

Select an option:
• If the media device is a FUSION-Link capable stereo, 

select 

Browse

 > 

Presets

.

• If the media device is a GXM antenna, select 

Menu

 > 

Presets

 > 

Add Current Channel

.

Unlocking SiriusXM Parental Controls

1

From the media screen, select 

Browse

 > 

Parental

 > 

Unlock

.

2

Enter your passcode.
The default passcode is 0000.

Setting Parental Controls on SiriusXM Radio Channels

Before you can set parental controls, the parental controls must 

be unlocked.
The parental control feature allows you to limit access to any 

SiriusXM channels, including those with mature content. When 

enabled, the parental control feature requires you to enter a 

passcode to tune to the locked channels.

Select 

Browse

 > 

Parental

 > 

Lock/Unlock

.

A list of channels appears. A checkmark indicates a locked 

channel.

NOTE: 

When you view the channels after setting parental 

controls, the display changes:

 indicates a locked channel.

 indicates an unlocked channel.

Changing a Parental Passcode on a SiriusXM Radio

Before you can change the passcode, the parental controls must 

be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Change 

PIN

.

2

Enter your passcode and select 

Done

.

3

Enter a new passcode.

4

Confirm the new passcode.

Restoring Default Parental Control Settings Values

This process deletes all the settings information you have 

entered. When you restore the parental control settings to their 

default values, the passcode value is reset to 0000.

1

From the media menu, select 

Installation

 > 

Factory 

Defaults

.

2

Select 

Yes

.

Clearing All Locked Channels on a SiriusXM Radio

Before you can clear all locked channels, the parental controls 

must be unlocked.

1

From the media screen, select 

Browse

 > 

Parental

 > 

Clear 

All Locked

.

2

Enter your passcode.

Setting the Device Name

1

From the media screen, select 

Menu

 > 

Installation

 > 

Set 

Device Name

.

2

Enter a device name.

3

Select 

Select

 or 

Done

.

Updating the Media Player Software

You can update the software on compatible connected stereos 

and accessories.

1

Go to 

www.fusionentertainment.com/marine

, and download 

the software update onto a USB flash drive.
Software updates and instructions are available on your 

device product page.

2

Insert the USB flash drive into the USB port of the stereo.

3

On the chartplotter media screen, select 

Menu

 > 

Installation 

Update Software

.

4

Select the item to update.

SiriusXM Weather

 WARNING

The weather information provided through this product is subject 

to service interruptions and may contain errors, inaccuracies, or 

outdated information, and consequently should not be relied 

upon exclusively. Always use common sense while navigating, 

and check alternate weather information sources prior to making 

safety-related decisions. You acknowledge and agree that you 

shall be solely responsible for use of the weather information 

and all decisions taken with respect to navigating in weather. 

Garmin will not be responsible for any consequences of using 

SiriusXM weather information.

NOTE: 

SiriusXM data is not available in all regions.

A Garmin SiriusXM satellite weather receiver and antenna 

receives satellite weather data and shows it on various Garmin 

devices, including the Navigation chart on a compatible 

chartplotter. The weather data for each feature comes from 

reputable weather data centers such as the National Weather 

Service and the Hydrometeorological Prediction Center. For 

more information, go to 

www.siriusxm.com/sxmmarine

.

SiriusXM Equipment and Subscription 

Requirements

To use satellite weather, you must have a compatible satellite 

weather receiver. To use SiriusXM satellite radio, you must have 

a compatible satellite radio receiver. Go to 

www.garmin.com

 for 

more information. You must also have a valid subscription to 

receive satellite weather and radio. For more information, refer 

to the instructions for your satellite weather and radio 

equipment.

Weather Data Broadcasts

Weather data is broadcast at different intervals for each weather 

feature. For example, radar is broadcast at five-minute intervals. 

When the Garmin receiver is turned on, or when a different 

weather feature is selected, the receiver must receive new data 

before it can be shown. You might experience a delay before 

weather data or a different feature appears on the chart.

40

SiriusXM Weather

Summary of Contents for GPSMAP 8500



































































Reviews: