GPSMAP
®
8500 Installation
Instructions
The GPSMAP 8500 is a highly customizable marine navigation
and information system. These instructions will explain the
connections between the various components of the system so
you can plan and install the best system for your boat.
In addition, these instructions will cover the mounting and wiring
of the primary GPSMAP 8500 device.
Important Safety Information
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place will void the product warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to
.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Product Support
• Go to
and click
Contact Support
for in-country support information.
• In the USA, call (913) 397.8200 or (800) 800.1020.
• In the UK, call 0808 2380000.
• In Europe, call +44 (0) 870.8501241.
Understanding the Components
The GPSMAP 8500 system can be set up in different ways, depending on your needs and the layout of your boat.
The GPSMAP 8500 is the brain of a GPSMAP 8500 system and it connects to other devices and GPSMAP 8500 systems on your
boat. The GPSMAP 8500 can be controlled by a connected GMM™ monitor, a connected GRID™ input device, or combination of
the two.
December 2012
190-01558-02_0A
Printed in Taiwan
