Garmin GPSMAP 695, Owner'S Manual

Page: 92 / 210

Garmin GPSMAP 695/696 Owner’s Manual 190-00919-00 Rev. D
78
Flight Planning
Overview
GPS Navigation
Flight Planning
Hazar
d
Avoidance
Additional F
eatur
es
Appendices
Index
loading an approach procedure into a stored flight plan:
An Approach Procedure can be loaded at any airport that has an approach available.
Only one approach can be loaded at a time in a flight plan. The route for a selected
approach is defined by designating transition waypoints.
1) Press the FPl Key.
2)
Turn the
FMS
Joystick to select the Flight Plan List Page.
3)
Press the
FMS
Joystick to activate the cursor.
4)
Turn or move the FMS Joystick to highlight the desired flight plan and press
the
ENT
Key.
5)
Press the SEl APPR Softkey.
6) Turn the FMS Joystick to display a drop down list of available approaches.
7) Turn or move the FMS Joystick to highlight the desired approach and press
the ENT Key.
8) With ‘Load Approach’ highlighted, press the ENT Key.
3.3 FliGht PlaN StOraGe
The GPSMAP 695/696 can store up to 50 flight plans. The active flight plan is erased
when another flight plan is activated. Details about each stored flight plan can be
viewed on the Flight Plan List Page
viewing information about a stored flight plan:
1) Press the FPl Key.
2)
Turn the
FMS
Joystick to display the Flight Plan List Page.
3)
Press the
FMS
Joystick to activate the cursor and turn or move the
FMS
Joystick to highlight the desired flight plan.
4)
Press the
ENT
Key. The Saved Flight Plan Page is displayed showing
departure, destination, total distance, and enroute safe altitude information
for the selected Flight Plan.
5)
Press the
FMS
Joystick or
DONE
Softkey to exit the Saved Flight Plan Page.