Garmin GPSMAP 60CSx Owner'S Manual Download Page 74

Page: 74 / 116

GPSMAP 60CSx Owner’s Manual

AIN

ENU

AIN

ENU

The Main Menu contains settings and features not

found on the main pages and sub-menus. The time

and date are shown at the bottom of this page. The

Main Menu is accessible from any page by pressing

MENU

twice. To select an item on the Main Menu,

highlight the menu item, and press

ENTER

Main Menu

NOTE:

If a page is added to the sequence, the

icon does not appear on the Main Menu.

Tracks

The Tracks Page shows the percentage of track

memory used and a list of saved tracks. Use the

Tracks Page to set up, clear, or save a track log, or

enable the TracBack feature for the current track log.

For more information, see page 31.

To access the Tracks Page:

1. Press

MENU

twice to open the Main Menu.

2. Select the

Tracks

icon, and press

ENTER

3. Highlight the

Setup

button, and press

ENTER

to open the Track Log Setup Page.

GPSMAP 60CSx Owner’s Manual

AIN

ENU

Tracks Page

Track Log Setup

Summary of Contents for GPSMAP 60CSx





















































































































Search results

Summary of Contents for GPSMAP 60CSx

Reviews:

Related manuals for GPSMAP 60CSx

Brands by name

Popular brands

Garmin GPSMAP 60CSx, Owner'S Manual

Search results

Summary of Contents for GPSMAP 60CSx

Reviews:

Related manuals for GPSMAP 60CSx

Brands by name

Popular brands