Garmin GPSMAP 6000 Series, Owner'S Manual

Page: 29 / 136

GPSMAP
®
6000/7000 Series Owner’s Manual 23
Charts and 3D Chart Views
Showing or Hiding Hazard Colors
1. From the Home screen, select Charts > Mariner’s eye 3D > Menu > Chart Appearance > Hazard
Colors
.
2. Complete an action:
• Select
on
to view shallow water and land with a color scale. Blue indicates deep water, yellow is
shallow water, and red is very shallow water.
• Select off to view the land as seen from the water.
Mariner’s Eye 3D, Hazard Colors Off Mariner’s Eye 3D, Hazard Colors On
Showing Range Rings
See “Showing Range Rings” ( page 20 ).
Selecting a Safe Depth
You can set the appearance of a safe depth for Mariner’s Eye 3D.
Note : This setting effects only the appearance of hazard colors in Mariner’s Eye 3D. It does not effect the
safe water depth Auto Guidance setting ( page 59 ) or the sonar shallow water alarm setting
( page 106 ).
1. From the Home screen, select Charts > Mariner’s eye 3D > Menu > Chart Appearance > Safe Depth .
2. Complete an action:
• For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the depth.
• For the GPSMAP 7000 series, use the on-screen keyboard to enter the depth.
3. Select Done .
Selecting a Lane Width
See “Selecting a Lane Width” ( page 20 ).
Showing Other Vessels
See “Configuring the Appearance of Other Vessels” ( page 66 ).
Showing Surface Radar
See “Showing Surface Radar” ( page 20 ).
Showing and Configuring Data Bars
See “Data Bars” ( page 62 ).
Using Waypoints and Tracks
See “Waypoints” ( page 34 ) or “Tracks” ( page 39 ).