Garmin GPSMAP 536, Owner'S Manual

Page: 28 / 96

22 GPSMAP 400/500 Series Owner’s Manual
Using Charts
instructions on searching for, and navigating to, these POIs, see the
“Where To?” section beginning on page 28 .
Using Automatic Guidance
Auto Guidance automatically creates and suggests routes based on
available BlueChart g2 Vision chart information. See page 49 for
instructions on setting up Auto Guidance for your boat.
If Auto Guidance must calculate a route close to potentially
dangerous points, those points are outlined in red, and a message
appears informing you that there are potentially unsafe areas along
the calculated route.
The “Where To?” section on
page 28 contains more information on
how to use Auto Guidance.
Using the Chart/Sonar Screen
NOTE: The Chart/Sonar screen, like the Sonar screen, is only
available when using a sonar-capable unit with a transducer
attached.
Use the Chart/Sonar screen to view the Navigation chart, Fishing
chart, Mariner’s Eye 3D, or Fish Eye 3D and sonar at the same time.
To view a split chart/sonar screen:
1. From the Home screen, select Chart/Sonar .
2. Select the type of chart on the split screen.
Navigation
chart screen
Sonar
screen
navigation/Sonar Combination
To access additional settings or options for the chart/sonar
screen, press MEnU .
Automatic Identification System
The Automatic Identification System (AIS) enables you to identify
and track other vessels.