GPSMAP
®
495 Quick Reference Guide
Backlit keypad for easy
nighttime operation
Antenna
External power
connector under
weather cap
USB
connector
under
weather cap
Slot for optional
data card
Battery pack. Press tab down
to remove battery pack for
replacement, if necessary.
256-Color TFT display
with backlighting
Antenna collapses
for storage. Be
sure the antenna
is up (as shown)
to receive satellite
signals.
GPSMAP 495 Keys
IN/OUT
—press to zoom in or zoom out on the Map Page.
PAGE/MODE
—press to cycle through the main pages in sequence
and remove a submenu from the display. Press and hold to switch
between Aviation Mode, Marine Mode, and Automotive Mode.
QUIT
—press to cycle through the main pages in reverse sequence,
revert to the previous value in a data entry field, or cancel a function.
ENTER/MARK
—press to select a highlighted option, initiate an
entry, and then confirm. Press and hold to mark a waypoint.
MENU
—press to view the Options Menu for the current page. Press
twice to open the Main Menu.
DIRECT TO
—press to start a Go To using airports, navaids,
recently used waypoints, or user-created waypoints. Press and hold
to open additional information for the current destination (such as
communication frequency and runway data). While in Automotive
Mode, press and hold for more than one second to open the Next Turn
Page and announce the next turn.
NRST/FIND
—press to show the nearest airports, navaids, points of
communication, and airspace boundaries in Aviation Mode. When
pressed multiple times in Aviation Mode, the Find Menu appears.
POWER
—press and hold to turn the unit on or off. Press and release
to adjust the backlighting and external speaker volume.
ROCKER
—press up, down, left, or right to select menu options,
enter
data, or move the pointer on the Map Page.
Using the Direct To Key
Press the
DIRECT TO
D
key in Aviation Mode to display the Go To Page.
Then select an airport, navaid, recent point, or user-defined point.
In Automotive or Marine Mode, press the
DIRECT TO
D
key to open the
Navigation window.
To Go To an airport or navaid:
1. Press the
DIRECT TO
D
key to open the Go To Page. Use the
ROCKER
to select the
Aviation
tab.
Airport
identifier
Facility
name
City
Go To Page—Aviation tab
2. Select the identifier, facility name, or city field, and press
ENTER
.
3. Enter the identifier, facility name, or city.
4. Press
ENTER
when the waypoint is shown and highlighted.
5. With the on-screen
Go To
button highlighted, press
ENTER
. A course
is plotted from your present location to the selected destination.
To Go To recently used waypoint or user-created waypoint:
1. Press the
DIRECT TO
D
key to open the Go To Page.
2. Select the
Recent
or
User
tab.
3. Highlight a waypoint from the list, and press
ENTER
.
4. With the on-screen
Go To
button highlighted, press
ENTER
. A course
is plotted from your present location to the selected destination.
Using the NRST/Find Key
Press the
NRST/FIND
key in Aviation Mode to show the Nearest Pages.
Then select an airport, navaid, recent point, or user-defined point.
In Automotive or Marine Mode, press the
NRST/FIND
key to open the Find
Menu.
To select an item as your destination from the Nearest Pages:
1. Press the
NRST/FIND
key.
2. To select a different category, use the
ROCKER
to select the tab
along the top of the page.
Nearest Page: Airport tab
3. Use the
ROCKER
to highlight a waypoint on the list, and press
ENTER
. The corresponding waypoint information page appears.
For airports, use the
ROCKER
to select the tabs across the top of the
information pages and show the airport data.
4. Highlight
Go To
, and press
ENTER
to navigate to the point. Press
QUIT
to return to the Nearest Pages. You can also highlight any
of the on-screen buttons to perform that action, such as
Delete
or
Show Map
.
© Copyright 2008 Garmin Ltd. or its subsidiaries
190-00925-00 Rev. A
Printed in Taiwan
