Trip Computer
The Trip Computer Page provides a quick reference for the
important data you want to show while navigating a route in
Automotive Mode. It indicates your current speed and many helpful
statistics about your trip, such as bearing, average speed, and
moving time.
Reset the Trip Computer before beginning a trip. If you make
frequent stops, leave the GPSMAP 396 turned on to allow the unit to
accurately measure elapsed time during the trip.
Trip Computer Page
Trip Computer Page Options
Press
MENU
while on the Trip Computer to show the options menu.
The following options are available from the Trip Computer Page.
Some options are only available if you have changed the page layout
from the default.
Set Up Page Layout
—allows you to choose the layout and number
of data fields. You can also select a graphical
Dashboard
, select to
show the Position Data Page layout (
2 Columns
), or select
4 Big
Fields
as the layout of the page. You can change the Data Fields on
the
2 Columns
and
4 Big Fields
layout pages.
Change Nearest Type
—allows you to specify the type of item to
be used as the nearest item (shown in the lower-left data field of the
Position Data (
2 Columns)
layout). The choices differ based on the
Usage Mode you are currently using.
Reset Trip
—clears trip information, except the maximum speed and
the odometer.
Reset Max Speed
—clears the maximum speed.
Reset Odometer
—clears the running total of the distance traveled.
Reset All
—clears all trip information including the maximum speed
and odometer.
72
GPSMAP 396 Pilot’s Guide
A
UTOMOTIVE
M
ODE
P
AGES
AND
F
EATURES
>
T
RIP
C
OMPUTER
