Garmin GPSMAP 276C, Owner'S Manual

Page: 66 / 134

Adding and Editing Stops (Via Points)
You can add Via Points—points through which you would like to
travel—to your route using the Edit Vias option.
To add Via Points to your route:
1. While navigating your route, press NAV to open the Navigate
Menu.
2. Select Edit Vias , and press ENTER . The Add/Edit Vias
window opens.
3. Highlight Add Via Point , and press ENTER .
Add/Edit Vias Page
Showing the original route without Via Points
4. From the pop-up window, highlight either Use Map or Use
Find Menu , and press ENTER .
5. If you selected Use Map , use the ROCKER to select an item
on the map, and press ENTER .
If you selected Use Find Menu , select an item from the Find
Menu as discussed in the “Finding an Item” beginning on
page 17 . Remember you can press MENU while the Find
Menu is open to find an item near another location, such
as the destination. The new point is added to the route as
shown on the Add/Edit Vias Page.
6. Repeat steps 3 through 5 until you have added all of the Via
Points that you want. Highlight Done , and press ENTER to
apply the new Via Points to the route.
GPSMAP 276C Owner’s Manual
A
utoMotIve
M
ode
> e
dItIng
y
our
r
oute