56
GPSMAP 2206/2210 Owner’s Manual
M
AIN
M
ENU
>
A
LARMS
T
AB
To view detailed information:
Highlight a message, and press
ENTER
. A window opens, showing
detailed information for the selected message.
Alarms Tab
Use the Alarms tab to define alarm settings. The Alarms tab is divided into three
sub tabs: System, Nav, and Sonar.
Alarm messages appear in red across the status bar or change the appearance of
a data field if that field shows alarm-related data (for example, depth or voltage).
Press
QUIT
to acknowledge an alarm message. The status bar and data field
remain red while the alarm condition persists.
To set an alarm:
1. Use the
ROCKER
to highlight the
System
,
Nav
, or
Sonar
sub tab.
2. Highlight the field next to the alarm you want to set, and press
ENTER
.
3. Change the mode to the setting you want, and press
ENTER
.
4. Repeat steps 1–3 to set additional alarms, and then press
ENTER
when
finished.
