Garmin GPSMAP 190-01230-10, Owner'S Manual

Page: 51 / 84

GPSMAP 400/500 Series Owner’s Manual 45
Viewing Information
Proj. Heading —allows you to enter the projected heading
time for AIS-activated vessels.
Trails —shows the tracks of AIS vessels. Select the length of
the track that appears using a trail.
Activating a Target for an AIS Vessel
NOTE
: Mariner’s Eye 3D charts are available only if you use a
BlueChart g2 Vision SD card. Fishing charts are available if you
use a BlueChart g2 Vision SD card or if your built-in map supports
Fishing charts.
1. From the Home screen, select
Charts
.
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Use the
Rocker
to select an AIS vessel. Press
SELECT
.
4. Select AIS Vessel > Activate Target .
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS
heading, and other information that is reported about a targeted AIS
vessel.
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Use the Rocker to select an AIS vessel. Press SELECT .
•
•
4. Select AIS Vessel .
Deactivating a Target for an AIS Vessel
NOTE : Mariner’s Eye 3D charts are available only if you use a
BlueChart g2 Vision SD card. Fishing charts are available if you
use a BlueChart g2 Vision SD card or if your built-in map supports
Fishing charts.
1. From the Home screen, select Charts .
2. Select
Navigation Chart
,
Fishing Chart
,
Perspective 3D
, or
Mariner’s Eye 3D
.
3. Use the Rocker to select an AIS vessel. Press SELECT .
4. Select
AIS Vessel
>
Deactivate
.
Setting the Safe-zone Collision Alarm
The safe-zone collision alarm is used only with AIS. The safe zone
is used for collision avoidance, and can be customized. All safe-zone
collision alarm settings are applied to all charts and to all 3D chart
views.
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .