Garmin GPSMAP 190-01120-00 Page 22 Owner'S Manual Download

Page: 22 / 132

GPSMAP

6000/7000 Series Owner’s Manual

Charts and 3D Chart Views

Heading and Projected Course of Activated AIS Targets

When heading and course over ground information are provided by an activated AIS target, the

heading of the target appears on a chart as a solid line attached to the AIS target symbol. A heading

line does not appear on a 3D chart view.
The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart

view. The length of the projected course line is based on the value of the projected heading setting

(

page 17

). If an an activated AIS target is not transmitting speed information, or if the vessel is not

moving, a projected course line does not appear. Changes in the speed, course over ground, or rate of

turn information transmitted by the vessel can impact the calculation of the projected course line.
When course over ground, heading, and rate of turn information are provided by an activated AIS

target, the projected course of the target is calculated based on the course over ground and the rate of

turn information. The direction in which the target is turning, which is also based on the rate of turn

information, is indicated by the direction of the barb at the end of the heading line. The length of the

barb does not change.

MMSI

Heading

Direction of turn

Projected course

Activated

dangerous

target

Target with Course over Ground, Heading, and Rate of Turn

When course over ground and heading information are provided by an activated AIS target, but

rate of turn information is not provided, the projected course of the target is calculated based on the

course over ground information.

MMSI

Heading

Projected course

Activated

target

Target with Course over Ground and Heading

Turning Off AIS Reception

AIS signal reception is turned on by default.

From the Home screen, select

Configure

other Vessels

AIS

off

All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel

targeting and tracking, collision alarms that result from AIS vessel targeting and tracking, and the

display of information about AIS vessels.

Summary of Contents for GPSMAP 190-01120-00





































































































































Search results

Summary of Contents for GPSMAP 190-01120-00

Reviews:

Related manuals for GPSMAP 190-01120-00

Brands by name

Popular brands

Garmin GPSMAP 190-01120-00, Owner'S Manual

Search results

Summary of Contents for GPSMAP 190-01120-00

Reviews:

Related manuals for GPSMAP 190-01120-00

Brands by name

Popular brands