background image

64 

GPSMAP 188/188C Sounder Owner’s Manual

M

AIN

 M

ENU

 > 

M

AP

 T

AB

Map Tab

The Map tab changes the display properties of the Map Page.  

The following pages contain descriptions of the Map tab’s eight 

sub tabs.

General Sub Tab

• 

Detail

—Most, More, Normal, Less, Least: controls how 

much map detail appears. This setting only applies to map 

features set to Auto. Features that have a specified zoom 

range or are turned off are unaffected by this setting.

• 

Orientation

—North Up: fixes the top of the map display to 

a north heading. Track Up: fixes the top of the map display 

to the current track heading. Course Up: fixes the map so the 

direction of navigation is always up.

• 

AutoZoom

—On, Off: when On the map automatically 

adjusts the map range to a lower range as you approach your 

destination point.

• 

Color Mode

—Water Mode, Land Mode: lightens the shade 

of the water areas in Water Mode and land in Land Mode. 

This option is only available on the GPSMAP 188. 

Source Sub Tab 

• 

Basemap

—On/Off: turns the built-in basemap on or off.

• 

Data Card Maps

—On/Off: turns on or off all BlueChart or 

MapSource data loaded in the unit or on the data card. 

• 

Built-in Maps

—On/Off: turns on or off all built-in 

BlueChart maps.

Summary of Contents for GPSMAP 188C































































































































Reviews: