manualshive.com logo in svg

Garmin GPSMAP 12 3 Series, Owner'S Manual, Page: 27 / 208

Share
Download
Garmin GPSMAP 12 3 Series Owner'S Manual Download Page 27

Controlling the Chartplotter

You can control the chartplotter using the touchscreen, using GRID

™

 remote controls, and using a Garmin voice 

control device.

Voice Control

After installing the Garmin Voice Control USB module (010-13194-00), you can use your voice to control the 
chartplotter using a compatible headset.

Changing the Voice Control Language

1 From the home screen, select Settings > System > Sounds and Display > Voice Control.
2 Select Voice Control > Voice Language.
3 Select the voice control language.

NOTE: The voice control language can be different than the text language.

Supported Headsets

The Voice Control USB module supports headsets and speakers with the following specifications:
• Bluetooth

®

 hands-free profile version 1.6 or higher

• mSBC audio codec (16 kHZ)
NOTE: Headset manufacturers often list these as "HD Voice" or "Wideband Speech" headsets.
A list of supported headsets is available at 

support.garmin.com/marine

.

Pairing a Wireless Headset with a Garmin Chartplotter

1 On the chartplotter, select Settings > Communications > Wireless Devices > Headsets.
2 Select Search for Devices.
3 Enable pairing mode on your headset according to the manufacturer's instructions.

The name of your headset appears on the chartplotter after it is detected.

4 Select the name of your headset.
5 Select Connect.

NOTE: Only one headset can be paired at a time.
Your headset appears on the chartplotter as Paired and Connected.

Using a Wireless Headset with a Garmin Chartplotter

Before using a wireless headset for voice control, make sure the volume on your headset is sufficient to hear 
voice responses.
1 Say OK Garmin.
2 Say a command (

Chartplotter Voice Commands, page 16

).

The chartplotter completes the action or provides a voice response.

Controlling the Chartplotter

15

Summary of Contents for GPSMAP 12 3 Series

















































































































































































































Reviews:

No comments